Build Program · Phase 3 · Chapters 3–4

Plumbing & Electrical Rough-In

Work from the project’s plumbing and electrical plans. Follow the water supply and waste systems, then study the wiring, panels, and electrical testing covered in the course.

← All Build Program chapters

Chapter 3

Rough Plumbing

Students read the utility and supply plans, practice with PEX on a workbench, then follow the hot- and cold-water supply lines, the toilet flange and the rough waste system.

Why it matters: Plumbing runs inside the walls and floor, so it has to be planned and checked before the house is closed in.

Overview video. The course opens this chapter with a short introduction before the build lessons.

Lessons and topics

Plumbing plans and PEX workbench Video lesson
Read the utility box and hot- and cold-water supply drawings, and identify PEX supply components in a bench demonstration.
Hot- and cold-water supply lines Video lesson
Follow the layout and installation of the supply lines through the structure.
Toilet flange Video lesson
Review how the toilet connects to the waste system at the floor.
Rough plumbing waste system Video lesson
Follow the combined lessons on the waste system and how it fits into the rest of the rough-in.

Download in the course portal. Scaled rough plumbing plan covering the utility box, water supply and waste drainage.

Plan and stage

Use the scaled rough plumbing plan to coordinate the utility box, supply and waste routes. Use the PEX workbench demonstration to review the fittings before the rough-in.

Document for review

Record PEX and fittings, waste pipe and fittings, and the installed supply and drainage layouts. The checklist also identifies product labels for the water heater and shower valve, plus the plumbing workbook checks.

Next: Electrical rough-in follows in the same open walls, and the two trades are coordinated through the project plans.

Chapter 4

Rough Electrical

Students review the project electrical plan and a separate sample circuit plan, identify tools and components, learn wiring and boxes, work through the panel at the workbench, and learn what the dielectric withstand (hipot) test verifies.

Why it matters: Electrical work is concealed by the walls, and the testing lesson shows students how the system is verified rather than assumed to be correct.

Overview video. The course opens this chapter with a short introduction before the build lessons.

Lessons and topics

Electrical plans and workbench basics Video lesson
Review the Project #1 electrical plan and a separate sample circuit plan, then identify common components and tools.
Wiring and boxes Video lesson
Follow wiring routes and box locations before the walls are closed.
Electrical panels Video lesson
Use the workbench lesson to understand the panel and its role in the electrical system.
Dielectric withstand testing Written overview
Learn what the high-potential (hipot) test checks and where it fits in the electrical inspection process.

Download in the course portal. Project #1 electrical plan and a separate sample circuit plan for reference.

Plan and stage

Use the Project #1 electrical drawing for installation planning. The separate circuit drawing is a reference example. The course calls for an electrician to perform the dielectric withstand test. Coordinate the test and its documentation before closing in the work.

Document for review

Record panel and breaker ratings, wire labels, box and grounding materials, fasteners, and installed nail guards. The workbook calls for an initial electrical test record after the wires are installed and before the panel is installed.

Next: Once rough-in work is documented, the exterior can be sheathed and wrapped.

Documentation and certification

Use the licensed course’s chapter checklists and workbook to record evidence as the build progresses. Instructors submit chapter evidence through the course and complete the chapter confirmation. Some chapters require inspector approval before the school can proceed. The chapter examples above summarize what the course asks instructors to document.

Ready to run this course at your school?

We’ll walk you through space requirements, scheduling, and what your students will take away.